What’s included
-
Patios and paths
Porcelain, natural stone and concrete paving washed clean.
-
Decking
Timber decks cleaned at a gentler pressure, so the boards are not damaged.
-
Moss and algae
Green growth and weeds lifted from the surface and the joints.
-
Tidy finish
Surrounding areas rinsed down and the dirt cleared away.
What we clean, and how
Paving and decking in London gardens soon turn green and slippery, especially in shade. We clear loose debris and weeds first, then wash the surface at a pressure that suits the material, so porcelain, natural stone, concrete and timber are cleaned without damage. Finally we rinse down and clear away the dirt washed out of the joints.
A clean is also a good way to finish a new build: in our modern Earlsfield back garden the patio was pressure washed once the work was done. If your paving is cracked, sunken or loose, a new patio may be the better answer.
- Patios, paths and steps
- Timber decking
- Front garden paths and paving
- Edging around paved areas
Before a sale, a party or the summer
A clean makes a big difference before you sell or let a home, or simply before the summer. It can be booked on its own or alongside garden maintenance, so the lawn, the borders and the paving are all looked after at the same time.
Recent projects
Real gardens we have worked on, with before and after photos.
Questions on pressure washing
Can’t see your question? Read our general questions or ask us directly.
Will pressure washing damage my patio?
Not when it is done carefully. We adjust the pressure for each surface, because natural stone, porcelain, timber and pointing all need different treatment, and we point out any loose or crumbling joints before we start.
Does pressure washing get rid of moss and algae for good?
It removes what is there, but moss and algae come back over time, especially in shade and damp. Keeping the surface swept and clear of leaves helps it stay clean for longer.
Can decking be pressure washed?
Yes, at a lower pressure and along the grain, so the timber is cleaned without roughening the surface. It is also a good chance to check the boards and fixings.
Do the joints need refilling after jet washing?
Sometimes. Washing can loosen sand or weak pointing between slabs. If the joints need refilling or repointing, we tell you and include it in the quote.